automatic cnc lathe machine Care and maintenance
What should the general automatic cnc lathe machine maintain and maintain?
The automatic cnc lathe machine needs to be timely lubricated and oiled. Generally speaking, the main shaft is four times, and the oil cup is rotated for about two weeks each time. The chain sprocket and gear need to be oiled twice by hand. Sleeves, which can easily lead to gear and chain life.
Usually also need to check the pressure of the hydraulic system, generally maintain 4-6 MPa. Then the liquid level will generally remain near the indicated position of the level gauge, and if it is consumed, it needs to be replenished in time. In general, when the system pressure drops to 4 MPa due to lack of oil or other reasons, it will cause inadequate workpiece blessing, which will cause equipment failure and workpiece quality problems.
At this time, it is necessary to regularly check the firmness of the fastening screws of the speed regulating sprocket, hopper, etc. Wipe the equipment once every shift to keep it clean.