What conditions need to be met for automatic cnc lathe machine to run normally
To ensure the normal operation of fully automatic CNC machine tools, the installation location, ambient temperature and power requirements are required. The installation location of the automatic cnc lathe machine should be far away from the vibration source, need to avoid the direct sunlight and heat radiation effects, and also need to avoid the effects of humidity.
If there is a vibration source near the machine tool, it is necessary to set up corresponding anti-vibration grooves around the machine tool, otherwise it will affect the machining accuracy and stability of the machine tool, which will cause poor contact of electronic components, which will cause failure and affect machine tool reliability.
Generally, the ambient temperature of the automatic cnc lathe machine cannot be lower than 30 degrees. There are exhaust fans and coolers inside the CNC electric control box. This is used to maintain the electronic components, especially the central processor's working temperature is constant or the temperature The difference is relatively small. Excessive temperature and humidity may lead to a reduction in the life of the control system components. Too much humidity may lead to increased dust, which may cause the integrated circuit board to stick, which may seriously cause a short circuit.
The automatic cnc lathe machine has strict control of the power supply voltage. The power supply voltage fluctuation needs to be within the allowable range and remain relatively stable, otherwise it will affect the normal operation of the CNC system.