When using CNC automatic lathe you usually need to choose the right tool
Generally speaking, the function processing of fully CNC automatic lathe is very strong. Generally speaking, when using automatic CNC lathe, it is generally necessary to select the correct tool. Only in this way can the cutting efficiency of the lathe be improved. The use of tools must first take into account the processing capacity of the machine tool, process content, parts materials, etc. In this way, when installing and using a CNC lathe, the choice of cutting tools should have high hardness and high wear resistance. Only in this way can the manufacturing of the cutting tool be improved, and the size of the cutting tool must be precise.
Once the spindle speed range is determined, the more gear stages, the more complex the structure of the machine. However, considering the performance of the application, more engagement ratios can reduce the relative speed loss. In this way, the details can be selected according to the consumption rate and construction requirements of the automatic CNC lathe. Generally speaking. The three axes of the automatic CNC lathe use linear bearing guides, which are driven by logarithmic servomotors. The linear arrangement of tools has the characteristics of rapid tool change. The CNC system has perfect functions and is easy to control. According to the needs of parts processing, the transverse power head can be selected for composite drilling and milling. Equipped with automatic charger, you can perform automatic production.
In the related measurement of the reverse deviation of the linear motion axis, the measuring tool is usually a dial indicator or dial indicator. If conditions permit, a dual-frequency laser interferometer can be used for measurement. When using a dial gauge or dial gauge for measurement, it should be noted that the bottom of the turntable and the length of the turntable should not be too high or too long, because the measurement base may force movement due to the too long cantilever during the measurement process, thus The count is inaccurate. The compensation value is not true. If you use a programming method to measure, you can make the measurement process more convenient and accurate.